Calculate linear feet of base and wall cabinets, estimated unit count, countertop square footage, and total cost for any kitchen or bathroom layout.
Cabinet Walls
Wall / Section
Length (ft)
Has uppers?
ft
ft
Openings & Pricing
Removes area under sink from wall uppers
ft
ft
$
$
$
YOUR RESULTS
Base Cabinet LF
—
lin ft
Wall Cabinet LF
—
lin ft
Est. Base Units
—
cabinets
Est. Wall Units
—
cabinets
Countertop Area
—
sq ft
Cabinet Cost
—
est.
Countertop Cost
—
est.
Total Cost
—
est.
Add each wall that receives cabinets, enter the length, and indicate whether it gets upper cabinets. The calculator subtracts your refrigerator and sink openings automatically, estimates the number of individual cabinet units, calculates countertop square footage with a 20% waste allowance for corners and cutouts, and gives you a full cost breakdown at your chosen price tier.
How to Measure for Kitchen Cabinets
Measure each wall that will receive cabinets from corner to corner, in feet. Enter each wall separately so you can toggle uppers on or off per wall, most kitchens skip upper cabinets above the sink, refrigerator, and sometimes the stove. The calculator totals your base run, deducts the fridge space, and deducts the sink zone from the upper run.
For a worked example: a standard U-shaped kitchen with three walls, 10 ft main wall, 8 ft side wall, and 6 ft return wall. Total base run = 24 ft minus 3 ft fridge = 21 LF of base cabinets. Upper run = 24 ft minus 3 ft fridge minus 2.5 ft sink = 18.5 LF of wall cabinets. At 24" average unit width: roughly 11 base units and 10 wall units. Countertop at 24" depth with 20% waste = 21 × 2 × 1.2 = 50.4 sq ft.
Standard Cabinet Dimensions
Cabinet Type
Height
Depth
Width Options
Base cabinet
34½" (36" with countertop)
24"
9"–48" in 3" increments
Wall (upper) cabinet
30", 36", or 42"
12"
9"–48" in 3" increments
Tall pantry / oven
84" or 96"
24"
18", 24", 30", 33", 36"
Bathroom vanity
31½"–34½"
18"–21"
24"–72" in 3" increments
Kitchen island
34½" (36" with top)
24"–30"
Custom or modular base units
The standard distance between the top of a base cabinet countertop (36") and the bottom of the wall cabinet is 18 inches, this is the ergonomic standard and code minimum in most residential kitchens. Range hoods above a stove require a minimum of 24–30 inches clearance from the cooking surface depending on the hood type.
Cabinet Pricing Tiers
Tier
Cost per Linear Foot
Lead Time
What You Get
Stock (big box store)
$75–$200
In stock or 1–2 weeks
Fixed sizes, limited finishes, assembly required
Semi-custom
$150–$500
4–8 weeks
More sizes and finishes; factory assembled
Custom (cabinet shop)
$400–$1,200+
8–16 weeks
Any size, any wood, built to your exact layout
IKEA (modular)
$80–$200 (system cost)
In stock
Flat-pack; custom fronts available separately
These prices cover cabinet boxes and doors only, not countertops, hardware (pulls, hinges), or installation labor. Add 15–25% of cabinet cost for professional installation, or budget 1–2 days of labor per 10 linear feet for experienced DIY installers.
Countertop Cost Reference
Material
Installed Cost (per sq ft)
Notes
Laminate (Formica)
$20–$50
DIY-friendly; wide pattern selection
Butcher block (wood)
$40–$100
Requires sealing; warm look
Ceramic tile
$25–$70
Grout lines collect grime; dated look
Quartz (engineered)
$75–$150
Non-porous, low maintenance; most popular
Granite
$60–$150
Natural stone; requires annual sealing
Marble
$80–$200
High-end; etches with acids
Concrete
$80–$150
Custom; can crack; requires sealing
Common Kitchen Cabinet Mistakes
Not accounting for the refrigerator depth. Standard base cabinets are 24 inches deep; counter-depth refrigerators are 24–25 inches, and standard fridges are 30–34 inches. A standard fridge will protrude past your cabinets unless you design a dedicated alcove or cabinet surround. Measure your appliance first.
Ordering stock cabinets without checking your ceiling height. Standard wall cabinets are 30–36 inches tall and designed to reach 84 inches from the floor (12" soffit space at 8 ft ceilings). If you have 9 ft or 10 ft ceilings, you may need taller cabinets or a separate crown molding section to fill the gap to the ceiling.
Underestimating the countertop overhang. Standard countertops overhang the cabinet face by 1 to 1½ inches. At corners and returns, the overhang adds material, that's why a 20% waste factor is built into the countertop calculation. Skipping this overage leads to short material orders.
Forgetting filler strips. Kitchen cabinets are made in 3-inch width increments. Unless your wall dimensions happen to hit exactly on those increments, you'll need filler strips (¾"–3" pieces) to close gaps between cabinets and walls or at corner transitions. Budget for these separately, they're not included in the linear foot count.
Skipping hardware in the budget. Cabinet pulls and knobs run $3–$20 per piece at the low end, $20–$60 for mid-range, and $60+ for designer hardware. A kitchen with 20 base and wall units might have 35–50 handles. At $15 each, that's $525–$750 in hardware alone, often forgotten until the install day.
Ordering tip: Before placing your cabinet order, confirm your wall measurements three times with a laser level, cabinets are not returnable once ordered from most semi-custom and custom suppliers. Also measure for level and plumb: out-of-level floors or walls need shimming, which can affect upper cabinet height and door alignment. Mark your high point on the floor before install day.
Kitchen Cabinet Layout Diagram
The diagram below shows a standard U-shaped kitchen layout with the key measurements this calculator uses. Every wall is measured separately because upper and lower cabinet runs often differ.
Measure each wall corner to corner · Base and upper runs are calculated independently · Sink zone has no upper cabinets
Cabinet Tiers, What You Actually Get at Each Price Point
The four cabinet tiers represent genuinely different products, not just different price points for the same thing. Understanding what changes between tiers helps you make the right choice for your project and your budget.
Tier
Box Construction
Door Quality
Hardware
Sizing
Stock (big box)
Particleboard or thin MDF; stapled corners
Thermofoil or basic painted MDF
Basic European hinges; no soft-close
Fixed widths in 3" increments; limited heights
Semi-custom
Plywood box standard; doweled or stapled
MDF or solid wood frames; more finish options
Soft-close standard; concealed hinges
More sizes; some modification options
Custom (cabinet shop)
Solid plywood; dovetail or mortise-and-tenon joints
Solid wood frames and raised panels; any species
Premium hardware included; any configuration
Any size, any depth, any interior fitting
IKEA SEKTION
Particleboard panels; proprietary assembly system
Sold separately (IKEA fronts or third-party)
Soft-close sold separately; IKEA system hinges
Fixed IKEA sizes; good accessory ecosystem
The practical argument for semi-custom over stock: semi-custom cabinets at $250–$400 per linear foot arrive assembled, use plywood boxes (not particleboard), and include soft-close hinges and drawer slides as standard. Stock cabinets at $100–$175 per linear foot require assembly, use particleboard boxes that swell with moisture, and typically don't include soft-close. For kitchen cabinets that will be used daily for 20+ years, the semi-custom box construction pays for itself in longevity.
Countertop Material Guide, 2026 Costs and Performance
Countertop choice is often the most visible decision in a kitchen remodel and one of the most discussed. Here is an honest comparison based on long-term performance rather than just aesthetics:
Material
Installed Cost (per sq ft)
Durability
Maintenance
Heat Resistance
Laminate (Formica)
$20–$50
Good (10–20 yrs)
Very low; wipe clean
Poor; hot pans cause damage
Butcher block
$40–$100
Good (oil annually)
Moderate; oil every 6–12 months
Poor to fair; avoid hot pans
Quartz (engineered)
$75–$150
Excellent (25+ yrs)
Very low; non-porous; no sealing
Fair; sudden temperature changes can crack
Granite
$60–$150
Excellent (lifetime)
Low; seal annually
Excellent; heat resistant
Marble
$80–$200
Good (etches easily)
High; seals frequently; acid-sensitive
Good; heat resistant
Quartzite
$80–$200
Excellent
Moderate; seal annually
Excellent
Concrete
$80–$150
Good (can crack)
Moderate; seal regularly
Excellent; heat resistant
Porcelain slab
$70–$180
Excellent
Very low; non-porous
Excellent
Quartz has dominated the mid-range market for good reason: it is non-porous, requires no sealing, comes in a consistent range of colors, and holds up to daily kitchen use better than marble. For homeowners who want the uniqueness of natural stone without marble's maintenance demands, quartzite is the best alternative.
Planning Your Cabinet Order, The Sequence That Prevents Expensive Mistakes
Kitchen cabinet projects fail most often not because of material quality but because of sequence errors. Here is the correct order of operations:
Select all appliances first. Cabinet layout is designed around appliance dimensions, refrigerator width and depth, range or cooktop cutout, dishwasher opening, microwave mounting. Changing appliances after cabinet orders are placed creates expensive change orders or requires reworking the layout.
Confirm wall and floor level before measuring. Mark the highest point on the floor. Base cabinets are shimmed up to level from this point. If you measure from a low spot, your layout will be off. Use a 6-foot level or a laser level across the full run.
Measure three times with a laser measure. Tape measures flex and sag on long runs. Laser measures give accurate readings corner-to-corner. Measure each wall at counter height, not at the floor or ceiling where baseboards and crown molding interfere.
Account for filler strips in the layout. Cabinets come in 3-inch width increments. A 14 ft 3 inch wall filled with 24-inch cabinets (7 cabinets = 14 ft) leaves a 3-inch gap. Plan filler strips into the layout before ordering to avoid surprises during installation.
Order samples before committing. Door samples and finish samples in your actual kitchen, under your actual lighting, look different from showroom samples. Many semi-custom manufacturers offer door samples for $5–$15, use them before placing a $10,000+ order.
Confirm lead times before starting demolition. Semi-custom cabinets take 4–8 weeks; custom takes 8–16 weeks. A kitchen that has been demolished and is waiting for cabinets is unusable. Confirm the ship date and have cabinets on-site before demo begins.
Frequently Asked Questions
How do I calculate linear feet of cabinets? ▾
Measure each wall that receives cabinets from corner to corner. For base cabinets, subtract the refrigerator opening (typically 3 ft). For wall (upper) cabinets, also subtract the sink area (typically 2.5 ft) and any area above the stove. Add all wall lengths together for total base and upper linear feet separately, they're measured and priced independently.
How much do kitchen cabinets cost? ▾
A typical 10×10 kitchen (the industry standard comparison) costs $2,000–$5,000 for stock cabinets, $5,000–$15,000 for semi-custom, and $15,000–$35,000 for fully custom. These figures cover cabinet boxes and doors only, add countertops ($2,000–$8,000), hardware ($300–$1,500), and installation labor (15–25% of cabinet cost) for the full picture. Always get three quotes from local suppliers.
How much countertop do I need? ▾
Countertop area = base cabinet linear feet × depth (typically 2 ft, including the 1–1½" overhang) × 1.20 for corners, cutouts, and waste. A 20 LF kitchen counter is about 48 sq ft. Quartz and granite run $75–$150 per sq ft installed; laminate runs $20–$50. Sinks, cooktops, and inside corners all add templating and cutting complexity that increases the waste factor.
What's the standard height between base and wall cabinets? ▾
The standard backsplash space between the countertop (at 36" height) and the bottom of wall cabinets is 18 inches, this puts the bottom of wall cabinets at 54 inches from the floor. This is the ergonomic standard for most adults. Some designers use 20 inches for a more open look or to accommodate taller appliances like stand mixers. Above a range, wall cabinets should not be closer than 24–30 inches from the cooking surface depending on the range hood type.
Can I install kitchen cabinets myself? ▾
Yes, cabinet installation is a common skilled DIY project. The main challenges are: finding level and plumb reference lines on imperfect walls and floors, scribing filler strips to irregular walls, and hanging wall cabinets level across long runs. Budget 1–2 full days per 10 linear feet of cabinets if you're experienced. Professional installation typically costs 15–25% of the cabinet cost and comes with a labor warranty that makes it worth it for semi-custom and custom orders.