Reviewed and updated: August 2026
Whether you're pouring a driveway, patio, sidewalk, or footing, this concrete calculator gives you fast, practical estimates in cubic yards and cubic feet, plus pre-mix bag counts and an estimated ready-mix material cost. Use it to get a fast estimate for planning, material ordering, and budgeting.
Calculated using the area of a circle (π × r²) × depth. A default 10% waste factor is applied automatically to all circular pour estimates.
Calculated using cylindrical volume (π × r² × depth) multiplied by the number of holes. A default 10% waste factor is applied automatically.
Results are estimates based on your inputs and standard volume formulas. Slab results include the waste factor you enter. Circle and post-hole estimates include a default 10% waste factor. Ready-mix pricing uses $135/yd³ as a national average and does not include delivery fees or short-load charges. Most suppliers have minimum delivery quantities, often 1–3 cubic yards. Always verify measurements and confirm details with your supplier before ordering.
Estimates are based on standard construction formulas and typical installation assumptions. Select your pour shape, enter your dimensions, choose a bag size if you're using pre-mix, and hit Calculate. The waste factor you enter is applied to all outputs, cubic yards, cubic feet, bag count, and cost all reflect the adjusted total.
Circular pours are calculated using the area of a circle (π × r²), and post holes are calculated using cylindrical volume (π × r² × depth) multiplied by the number of holes. A default 10% waste factor is applied to circle and post hole calculations automatically. Use the calculator above to adjust inputs for your specific project.
Here's how the math works for one of the most common jobs, a 10 ft × 10 ft patio slab at 4 inches thick:
👉 Quick rule: For a standard 4-inch slab, divide your square footage by 81 to get a rough cubic yard estimate before waste. Always add at least 5–10%, ordering the exact calculated amount almost always means running short at the worst possible moment.
Concrete volume is calculated as length × width × thickness, with thickness converted from inches to feet by dividing by 12. For a standard 4-inch slab, divide square footage by 81 to get a rough cubic yard estimate before waste. This calculator applies your selected waste factor to slab calculations and uses the adjusted total for all outputs, cubic yards, cubic feet, bag count, and cost.
One cubic yard covers approximately 81 square feet at 4 inches thick, or 108 square feet at 3 inches thick. Always account for extra, uneven subgrade, form overfill, and spillage consume more concrete than the volume formula suggests.
How much extra you should order depends on the pour type and site conditions. Running short mid-pour is one of the most costly mistakes on a concrete job, a second truck delivery, possible cold joint, and lost time all add up fast.
Use this table to quickly estimate cubic yards per 100 square feet at common thicknesses. Multiply by your area in hundreds of square feet to get your base volume before waste.
| Thickness | Cu Ft per 100 sq ft | Cu Yards per 100 sq ft | Common Use |
|---|---|---|---|
| 3.5" (3½") | 29.2 | 1.08 | Sidewalks, light patios |
| 4" | 33.3 | 1.23 | Standard residential slab |
| 5" | 41.7 | 1.54 | Driveways, heavier loads |
| 6" | 50.0 | 1.85 | Heavy vehicle traffic |
| 8" | 66.7 | 2.47 | Commercial, industrial |
For jobs under about 1 cubic yard, pre-mix bags are usually the most practical option, no truck scheduling, no minimum order, and you can work at your own pace. For larger pours, ready-mix delivered by truck is faster, the concrete quality is generally better than hand-mixed bags, and the cost per yard is typically lower.
⚠️ Important: Most ready-mix suppliers have minimum delivery quantities, often 1–3 cubic yards, and charge a short-load fee ($50–$200) on smaller orders. If your pour is between 0.75 and 2 yards, compare the total cost of bagged concrete against a small truck order including the short-load fee before deciding.
Not all concrete is the same. The compressive strength of concrete is rated in PSI (pounds per square inch) measured at 28 days after pouring. The right mix depends on the application, using too weak a mix on a driveway leads to premature cracking and surface deterioration.
| Mix Strength | PSI Rating | Common Applications | Notes |
|---|---|---|---|
| Standard mix | 2,500 PSI | Sidewalks, patios, steps (foot traffic only) | Minimum for residential flatwork |
| General purpose | 3,000 PSI | Driveways, garage floors, most residential slabs | Most common residential specification |
| Heavy duty | 4,000 PSI | Driveways with heavy vehicle traffic, footings, structural slabs | Recommended for driveways with truck access |
| High strength | 5,000 PSI | Commercial floors, structural elements, columns | Typically requires engineered mix design |
| Fiber reinforced | 3,000 to 4,000 PSI | Slabs prone to cracking, driveways, industrial floors | Polypropylene or steel fibers reduce plastic shrinkage cracking |
For most residential driveways, patios, and garage floors, 3,000 PSI is the standard specification and what most ready-mix suppliers deliver by default. If you are building a driveway that will regularly carry heavy trucks or equipment, specify 4,000 PSI when ordering. Pre-mix bags are typically 4,000 to 5,000 PSI, stronger than standard ready-mix but in much smaller quantities.
Use this table to quickly find the right thickness for your project type and understand the expected cubic yard requirement before entering your dimensions.
| Application | Recommended Thickness | Recommended PSI | Reinforcement |
|---|---|---|---|
| Sidewalk / walkway | 3.5 to 4 inches | 2,500 to 3,000 | Optional, wire mesh or fiber |
| Patio (foot traffic) | 4 inches | 2,500 to 3,000 | Optional, wire mesh or fiber |
| Residential driveway | 4 to 5 inches | 3,000 to 4,000 | Recommended, #3 or #4 rebar at 18" OC |
| Garage floor | 4 to 6 inches | 3,000 to 4,000 | Recommended, #4 rebar at 12 to 18" OC |
| Foundation footing | 8 to 12 inches | 3,000 | Required, rebar per engineer or code |
| Structural slab | 6 inches+ | 4,000+ | Required, engineered design |
| Deck post holes | Diameter 2x post width | 3,000 to 4,000 | Not applicable |
| Fence post holes | Diameter 3x post width | 2,500 to 3,000 | Not applicable |
For driveways and structural slabs, proper reinforcement is as important as concrete thickness. Use our rebar calculator to estimate reinforcing steel quantities for your slab project.
This calculator is ideal for planning and material ordering on standard residential projects. For structural work, always verify your estimate with a licensed contractor or engineer before ordering.
Need help estimating concrete and overall project costs? Read our step-by-step cost estimation guide.
Not sure how much concrete you need? Read our step-by-step concrete estimation guide.
Want to estimate total cost? See our concrete cost guide.
Not sure how much concrete you need? Read our step-by-step concrete estimation guide.
Want to estimate total cost? See our concrete cost guide.
Concrete volume is calculated by multiplying three dimensions, length, width, and thickness, then converting from cubic feet to cubic yards by dividing by 27. The diagram below shows how this works for a standard rectangular slab.
Always convert thickness from inches to feet before calculating · One cubic yard = 27 cubic feet · Ready-mix is ordered by the cubic yard
Concrete is strong in compression but weak in tension. For any slab that carries vehicles or heavy loads, reinforcement is essential to control cracking and add tensile strength. Here's what each reinforcement type does and when to use it:
| Reinforcement Type | Common Spacing | Best For | Notes |
|---|---|---|---|
| No reinforcement | — | Sidewalks, light patios (foot traffic only) | Add fiber to mix for crack resistance without rebar |
| Wire mesh (6×6 W1.4×W1.4) | Single layer, centered in slab | Residential patios, shed floors | Controls crack width but not as effective as rebar; must be elevated off subgrade |
| #3 rebar (3/8") | 18" OC each way | Residential driveways, garage floors | Minimum for vehicle-bearing slabs; place at 1/3 depth from bottom |
| #4 rebar (1/2") | 12"–18" OC each way | Heavy vehicle driveways, structural slabs | Standard for commercial-adjacent residential; heavier truck traffic |
| Fiber reinforcement | Mixed into concrete (1.5 lb/CY) | All slabs, especially driveways and floors | Controls plastic shrinkage cracking; add to any mix; doesn't replace rebar for structural work |
A common mistake is placing wire mesh or rebar directly on the subgrade and then pouring over it, the reinforcement ends up at the bottom of the slab where it does little structural good. Use rebar chairs or dobies (small concrete blocks) to elevate reinforcement to 1/3 of the slab depth from the bottom. For a 4-inch slab, that's about 1.5 inches off the ground.
The finish on a concrete slab affects appearance, slip resistance, and maintenance requirements. Here are the most common residential options:
| Finish Type | Process | Cost Premium | Best For |
|---|---|---|---|
| Broom finish | Textured with a stiff broom while wet | None (standard) | Driveways, sidewalks, slip-resistant, low maintenance |
| Smooth / trowel finish | Steel-troweled to a smooth surface | +$0.50–$1.00/sq ft | Garage floors, basement floors, easier to sweep |
| Exposed aggregate | Surface seeded and exposed while wet | +$2–$4/sq ft | Patios, driveways, decorative, slip-resistant |
| Stamped concrete | Patterns pressed into wet surface; usually colored | +$8–$18/sq ft | Decorative patios, pool decks, entryways |
| Stained or dyed | Chemical stain or dye applied after curing | +$2–$6/sq ft | Interior floors, decorative applications |
| Polished | Ground and polished with diamond abrasives | +$3–$8/sq ft | Commercial interiors, high-end residential floors |
Concrete gains strength through a chemical process called hydration, not drying. The misconception that concrete "dries" leads to one of the most common mistakes in residential concrete work: allowing the surface to dry out too quickly. Concrete that dries too fast in hot or windy weather loses water before hydration is complete, resulting in a weak, dusty, crack-prone surface.
Curing means keeping concrete moist for at least 7 days after the pour. The practical approach: mist the slab with water and cover it with plastic sheeting or burlap for 7 days, or apply a liquid curing compound immediately after finishing. Curing concrete reaches approximately 70% of its design strength at 7 days and 99% at 28 days, this is why concrete test cylinders are always broken at 28 days.
Sealing comes after curing is complete, at least 28 days after the pour. A penetrating silane/siloxane sealer protects against water infiltration, oil staining, and (in freeze-thaw climates) de-icing salt damage. Apply sealer every 3–5 years for driveways and every 5–7 years for protected patios. Sealing is not optional for driveways in cold climates, unprotected concrete in freeze-thaw cycles with road salt exposure will scale and spall within 5–10 years.