Estimate your kitchen renovation budget by size, finish level, and scope. Get a line-item breakdown covering cabinets, countertops, appliances, flooring, plumbing, electrical, and labor.
Kitchen Size & Scope
What's Included?
Cabinets & Hardware
Countertops
Appliances
Flooring
Plumbing (sink, faucet, disposal)
Electrical (lighting, outlets, circuits)
Backsplash / Tile
Drywall, Paint & Finishing
Demo & Haul-Away
COST ESTIMATE
Low Estimate
—
Mid Estimate
—
most likely
High Estimate
—
Cost per Sq Ft
—
$/sq ft
Line Item Breakdown
TOTAL (mid estimate)—
⚠️ Estimates are based on 2026 national averages and vary significantly by region, contractor, and project specifics. Always get 3 bids from licensed kitchen contractors or general contractors before finalizing your budget.
How Much Does a Kitchen Remodel Cost?
Kitchen remodels range from $10,000 for a minor cosmetic refresh to $150,000+ for a full gut renovation of a large gourmet kitchen. The national average for a mid-range kitchen remodel is $25,000 to $60,000. The biggest cost drivers are cabinet quality, countertop material, appliance tier, and whether the layout changes.
Where the Budget Goes
The chart below shows the typical share of a mid-range kitchen remodel budget by category. Cabinets alone often account for a third or more of total spend, which is why cabinet-grade selection has the biggest single impact on your final number.
Approximate share of total budget for a mid-range kitchen remodel. Actual proportions shift with finish level and scope.
Remodel Scope
What's Included
Typical Cost Range
ROI at Resale
Minor Update
Paint, hardware, faucet, lighting
$5,000–$15,000
80–85%
Mid-Range
New cabinets, countertops, appliances
$25,000–$60,000
65–75%
Major Remodel
Semi-custom cabinets, stone counters, upgraded appliances
In a typical mid-range kitchen remodel, here's how the budget breaks down:
Cabinets & Hardware (25–35%): the single largest line item. Stock cabinets from a home improvement store run $100–$200 per linear foot installed. Semi-custom runs $200–$450/lf. Custom starts at $500/lf and goes up significantly from there.
Countertops (10–15%): laminate is the most economical at $20–$50/sq ft installed. Quartz runs $70–$120/sq ft. Marble and granite are $80–$150/sq ft. Quartzite and specialty stone start at $100/sq ft.
Appliances (15–20%): a full suite (refrigerator, range, dishwasher, microwave) runs $3,000–$6,000 at entry level, $6,000–$15,000 mid-range, and $15,000–$40,000+ for professional-grade.
Labor (20–35%): installation of cabinets, countertops, tile, flooring, and trim. Labor rates vary significantly by region, $60–$120/hour in most markets.
Plumbing & Electrical (10–15%): moving a sink or adding circuits adds significantly; staying in the same location keeps this minimal.
Cabinet Options Compared
Cabinet Type
Cost (installed, per LF)
Lead Time
Best For
Stock
$100–$200/lf
In stock / 1–2 weeks
Budget remodels, rentals
RTA (Ready-to-Assemble)
$150–$300/lf
2–4 weeks
DIY-friendly, better quality
Semi-Custom
$200–$450/lf
4–8 weeks
Most remodels, best value
Custom
$500–$1,500+/lf
8–16 weeks
High-end remodels, unusual layouts
Countertop Materials Compared
Countertops are one of the most visible surfaces in the kitchen and one of the categories worth researching carefully, since swapping materials later means tearing out an installed surface.
Material
Cost (installed)
Maintenance
Best For
Laminate
$20–$50/sq ft
Low; wipe clean
Budget remodels, rentals
Quartz
$70–$120/sq ft
Very low; no sealing
Most homeowners; best all-around value
Granite
$80–$150/sq ft
Annual sealing
Natural stone look; heat resistant
Marble
$100–$200/sq ft
High; etches and stains
High-end aesthetics; light use
Butcher block
$50–$90/sq ft
Regular oiling
Warm look; island tops
Quartz has become the default recommendation for most kitchens because it combines quartz's non-porous, low-maintenance surface with consistent factory patterning, so slabs match seamlessly at seams. Natural stone (granite, marble) offers more variation and character but requires periodic sealing to resist staining.
How to Sequence a Kitchen Remodel
Kitchen remodels fail schedules more often from poor sequencing than from any single trade running late. A typical mid-range remodel follows this order:
Design and order cabinets (weeks before demo): lead times are the longest lever in the whole project, so cabinets get ordered first, often before demo even starts
Demo: remove old cabinets, countertops, flooring, and any fixtures being replaced
Rough-in plumbing and electrical: relocate or add lines behind the walls before they're closed up
Drywall and paint: patch and finish walls before cabinets go in
Cabinet installation: cabinets are set and leveled first, since everything else references off them
Countertop templating and installation: stone fabricators template after cabinets are set, then fabricate and install, usually 1 to 2 weeks later
Backsplash, plumbing fixtures, and appliances: installed once countertops are in place
Final electrical and punch list: light fixtures, outlet covers, and touch-ups
The countertop templating step is the most common schedule bottleneck, since most fabricators won't template until cabinets are physically installed, and then need another 1 to 2 weeks to fabricate and install the stone. Build that gap into your timeline expectations from the start.
Where to Save vs. Where to Splurge
Save here:
Appliances, mid-range appliances perform as well as luxury brands for everyday cooking; the difference is mainly aesthetics and features
Backsplash, subway tile is timeless and costs $5–$15/sq ft; designer tile starts at $25/sq ft and can exceed $100/sq ft
Flooring, LVP (luxury vinyl plank) looks like hardwood at $4–$8/sq ft installed vs $12–$20/sq ft for real hardwood
Splurge here:
Cabinet construction, dovetail joints, plywood boxes, and soft-close hinges last 20+ years; particleboard cabinets delaminate in 5–10
Countertops, this is what you see and touch every day; quality stone or quartz adds lasting value and is worth the upgrade
Range hood, proper ventilation prevents grease buildup, odors, and moisture damage; an undersized hood is one of the most common kitchen regrets
👉 Order cabinets first. Cabinet lead times, especially semi-custom and custom, are the most common reason kitchen remodels run behind schedule. Order them before demo begins, not after.
Common Kitchen Remodel Budget Mistakes
Skipping a contingency fund: budget an extra 10 to 20% for surprises behind the walls, especially in homes over 30 years old with unknown plumbing or electrical conditions
Underestimating "hidden" costs: permits, dumpster rental, temporary kitchen setups, and eating out during construction add up and are often left out of DIY budgets
Choosing finishes before cabinets: cabinet color and door style anchor the whole design; picking countertops or backsplash first often leads to costly re-selections
Not verifying appliance dimensions before ordering cabinets: cabinet openings are typically built to standard appliance sizes; a non-standard fridge or range can force expensive cabinet modifications
Skipping a detailed contract: a fixed-scope, itemized contract with a payment schedule tied to milestones protects both homeowner and contractor from disputes
Some kitchen tasks are genuinely DIY-friendly for a handy homeowner: painting, installing hardware, swapping a faucet, or laying floating vinyl plank flooring. Others carry real risk if done wrong and are best left to licensed professionals.
Task
DIY Difficulty
Recommendation
Painting, hardware, fixtures
Easy
DIY-friendly for most homeowners
Flooring (LVP, laminate)
Moderate
DIY-friendly with basic tools and patience
Cabinet installation
Moderate to hard
DIY possible; professional install ensures level, plumb results
Countertop fabrication and install
Hard
Hire a fabricator; stone is heavy and unforgiving of measurement errors
Electrical (new circuits, outlets)
Hard
Licensed electrician required in most jurisdictions
Plumbing (moving sink or gas line)
Hard
Licensed plumber required; code compliance and leak risk
A common middle-ground approach is to act as your own general contractor, handling demo, painting, and simple installs yourself while hiring licensed trades for electrical, plumbing, and countertop fabrication. This can save 10 to 20% versus a full-service general contractor, but it requires time to manage scheduling and coordinate between trades.
Frequently Asked Questions
What is the average cost of a kitchen remodel? ▾
The national average kitchen remodel costs $25,000–$60,000 for a mid-range renovation. Minor cosmetic updates (paint, hardware, new fixtures) run $5,000–$15,000. Full gut renovations with custom cabinets, stone countertops, and high-end appliances can reach $80,000–$150,000+. Costs are 20–50% higher in coastal metro areas like New York, San Francisco, and Boston.
How long does a kitchen remodel take? ▾
A minor kitchen update takes 1–3 weeks. A mid-range remodel with new cabinets and countertops takes 6–10 weeks. A full gut with layout changes takes 3–5 months. Cabinet lead times are often the critical path: semi-custom cabinets take 4 to 8 weeks, custom cabinets 8 to 16 weeks. Order cabinets before demo begins. Plan to be without a full kitchen for 4–8 weeks minimum on a mid-range remodel.
Should I move the kitchen layout? ▾
Moving the kitchen layout, changing where the sink, stove, or refrigerator go, adds $5,000–$20,000 for relocated plumbing, electrical, and potentially structural work. It's worth it if the current layout is fundamentally dysfunctional. Most kitchen designers recommend optimizing the existing footprint before changing it. The work triangle (sink, stove, refrigerator) should be 12–26 feet total perimeter for efficient use.
What countertop material offers the best value? ▾
Quartz offers the best combination of durability, appearance, and value for most homeowners. It's non-porous (no sealing required), highly scratch and stain resistant, and available in hundreds of styles. It costs $70–$120/sq ft installed. Granite is comparable in price but requires annual sealing. Marble is beautiful but high-maintenance. It etches and stains easily. Laminate has improved significantly and is a good budget option at $20–$50/sq ft installed.
Do I need a permit for a kitchen remodel? ▾
Permits are required for any work involving electrical changes (adding circuits, moving outlets), plumbing changes (moving sink or gas line), or structural work (removing walls). Cosmetic work, replacing cabinets in the same location, new countertops, flooring, and paint, typically does not require a permit. When in doubt, check with your local building department. Unpermitted electrical and plumbing work can cause problems with homeowner's insurance and at resale.
How can I save money on a kitchen remodel without it looking cheap?
Keep the existing layout to avoid moving plumbing and electrical, which is one of the most expensive line items to change. Choose quartz or a mid-range laminate for countertops instead of marble, and pick semi-custom rather than fully custom cabinets, since the visual difference is small but the cost gap is large. Painting existing cabinet boxes and replacing only the doors and hardware can also deliver most of the visual impact of a full cabinet replacement at a fraction of the cost.